常見問題
產品
聯系嘉瑞杰
山東嘉瑞杰機械科技有限公司
聯系人：王經理
電話：0531-88670722
手機 : 15866677695
地址：濟南市天橋區梓東大道鑫茂科技城143號樓102室
3d打印手板模型如何進行修補處理？
來源：http://m.seaoil.cn作者：山東嘉瑞杰機械科技有限公司發布時間：2020-01-19
大家好，我是小編。3 d打印hand-board模型功能驗證的用戶或設計驗證總是滿足哈希,很難避免不小心刮他的作品,同時,在運輸?shù)倪^程中,也難免會散列,不小心爛,失去了打印,不愿意放棄,這就是3 d打印hand-board模型修復。下面是一個實用的介紹。
Hello, I'm Xiaobian. The user or design verification of 3D print hand board model function verification always satisfies the hash, so it's hard to avoid scraping his works carelessly. At the same time, in the process of transportation, it's hard to avoid hashing, carelessly rotting, losing printing and unwilling to give up. This is 3D print hand board model repair. Here is a practical introduction.
1. 用502膠水粘接。(502膠水不宜過量，會影響粘合效果，注意使用502膠水)除502膠水外，還介紹了幾種其他不同種類的膠水可以使用。
1. Use 502 glue for bonding. (502 glue should not be excessive, which will affect the bonding effect. Pay attention to the safe use of 502 glue). In addition to 502 glue, several other different kinds of glue can be used.
2. 粘貼后仍然會有一些小的間隙
2. There will still be some small gaps after pasting
3.還有一些缺失的部分，是缺口。
3. There are still some missing parts, which are gaps.
4. 先打磨縫隙，試著處理痕跡。
4. First polish the gap and try to deal with the traces.
5. 使用3d打印筆，使用ABS 3d打印材料進行修復(ABS比PLA打磨的更好)，其他材料可以進行修復。
5. Use 3D printing pen, use ABS 3D printing material for repair (ABS is better than PLA grinding), and other materials can be repaired.
6. 使用3D打印筆來填補空白。這是PLA 3D打印材料。其他材料，如SLA光敏樹脂，不能使用3D打印筆。
6. Use a 3D pen to fill in the blanks. This is PLA 3D printing material. Other materials, such as SLA photosensitive resin, cannot use 3D printing pen.
7. 波蘭。砂紙可用來拋光。砂紙厚度可根據模型的具體要求進行選擇。
7. Poland. Sandpaper can be used for polishing. The thickness of sandpaper can be selected according to the specific requirements of the model.
重復3次，以填補和拋光的差距和差距，以確保順利連接的差距和表面
Repeat 3 times to fill and polish gaps and gaps to ensure smooth connection of gaps and surfaces
8 .修的差不多，因?yàn)檫@是測試用的，所以隨機修，修的效果一般，比較仔細可以修的痕跡不大。
8. It's almost repaired, because it's for testing, so the effect of random repair is general, and the trace that can be repaired carefully is not big.
9. 經過以上步驟，3D打印的手板模型的修復工作就完成了，其實并不難，用更多的人手就可以很好的修復。
9. After the above steps, the repair of 3D printed handboard model is completed. In fact, it is not difficult. It can be well repaired with more hands.
相關資訊
手板制作加工時注意事項
2024-04-11手板加工如何服務好客戶?
2024-04-09手板加工的過程及方式
2024-04-06快速成型的基本原理構成有哪些？
2024-02-27工業產品設計中常見手板件的制作方式
2024-02-23ABS手板模型的優勢有哪些？
2024-02-21鋁合金手板模型制作手法與維護
2024-02-10鋁合金手板模型的氧化工藝介紹
2024-02-10汽車手板模型制作的低壓灌注工藝
2024-02-06手把手教你怎么選機箱機柜定制工廠
2024-01-27
